Hitachi CP-X251 User Manual – Operating Manual page 39

SCREEN Menu (continued)
Item
MESSAGE
SOURCE NAME
TURN ON TURN OFF
When the TURN ON is selected, the following message function works.
"AUTO IN PROGRESS" while automatically adjusting
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
"Searching...." while searching for the input
"Detecting...." while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ratio displayed by changing
The indication of the My Memory displayed by changing
The indication of the Picture Mode displayed by changing
The indication of "FREEZE" and "II" while freezing the screen by
pressing the FREEZE button.
• When the TURN OFF is selected, please remember if the picture
is freezing. Do not mistake freezing for a malfunction (
Each input port for this projector can have a name applied to it.
menu to select SOURCE NAME and press
will be displayed.
NAME menu to select the port to be named
NAME dialog will be displayed.
(3) The current name will be displayed
ENTER or INPUT buttons to select and
enter characters. The RESET button can
be used to erase 1 character at a time. The
name can be a maximum of 16 characters.
(4) To change an already inserted character,
[A-N] row to move the cursor to the name
buttons to select character to be changed.
Once a character in the name is selected
down to the character entry area to select
and enter characters as described above.
(5) Select and press the ENTER or
To revert to the previous name without
and the INPUT button simultaneously.
Description
*Right side of the menu is blank
SCREEN Menu
22).
SOURCE NAME MENU
39