Remote Control; Putting Batteries - Hitachi CP-X251 User Manual – Operating Manual

Remote control

Putting batteries

WARNING
directed. Battery may explode if mistreated. Do not recharge, disassemble or
And also improper use may result in cracking or leakage, which could result in
•
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a battery.
• Keep a battery away from children and pets. If swallowed consult a physician
immediately for emergency treatment.
• Do not short circuit or solder a battery.
•
•
If the liquid adheres to your body or clothes, rinse well with water immediately.
• Obey the local laws on disposing the battery.
1.
Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
I nsert the batteries.
2.
Align and insert the two AA batteries according to their plus and minus
terminals as indicated in the remote control.
Close the battery cover.
3.
Replace the battery cover in the direction of the arrow and snap it back into place.
Always handle the batteries with care and use them only as
Remote control
15