Searching An Input Signal; Selecting An Aspect Ratio; Adjusting The Zoom And Focus - Hitachi CP-X251 User Manual – Operating Manual

Selecting an input signal (continued)
1. Press the VIDEO button on the remote control to select an
input for video signal.
Each time you press the button, the projector switches its
video input port as below.
COMPONENT VIDEO
when TURN ON is selected for the AUTO SEARCH item in the OPTION menu
detected at the port, projector will begin to check other ports in above order.

Searching an input signal

1. Press the SEARCH button on the remote control.
The projector will start to check its input ports in order to
When an input is found, the projector will stop searching and display the image.
If no signal is found, the projector will return to the state selected before the
operation.
RGB IN 1 RGB IN 2

Selecting an aspect ratio

1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the mode for aspect
ratio in turn.
For an RGB signal
NORMAL
For a video signal, s-video signal or component video signal
4:3 16:9
For a no signal

Adjusting the zoom and focus

1. Use the zoom ring to adjust the screen size.
2. Use the focus ring to focus the picture.
S-VIDEO
COMPONENT VIDEO
4:3 16:9 SMALL
14:9 SMALL
VIDEO
S-VIDEO
Focus ring
Operating
VIDEO SEARCH
RGB
BLANK
ASPECT AUTO
SEARCH
VIDEO RGB
ASPECT AUTO BLANK
VIDEO
SEARCH
VIDEO RGB
BLANK
ASPECT AUTO
MAGNIFY
HOME PAGE UP VOLUME
ON
Zoom ring
19