Hitachi CP-X251 User Manual – Operating Manual page 33

INPUT Menu (continued)
Item
COMPONENT
VIDEO FORMAT
FRAME LOCK
RGB IN
VIDEO port.
COMPONENT
When the SCART RGB is selected, the COMPONENT VIDEO port
function as a port for a SCART RGB signal input and VIDEO port
function as a port for SCART RGB sync input. A SCART adapter
and SCART cable realize a SCART RGB input to the projector. For
details, contact your dealer.
Set the video format for the s-video port and video port.
(1) Use th
for video format.
AUTO NTSC
N-PAL M-PAL
• This item is performed only for a video signal
from the VIDEO port or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (ex. an irregular picture, a color lack),
please select the mode depending on the input signal.
TURN ON TURN OFF
• This item performs only at a RGB signal with vertical frequency of
50 to 60 Hz.
• When the TURN ON is selected, a moving picture is displayed
more smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select the TURN OFF.
Set the RGB input signal type for the RGB port.
(1) Use th
port to be set.
RGB1 RGB2
input signal type.
SYNC ON G ON
• Selecting TURN ON turns on the SYNC ON G mode. The SYNC
ON G mode allows reception of SYNC ON G.
• In the SYNC ON G mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and turn SYNC ON G off, and then reconnect
the signal.
Description
SCART RGB
PAL SECAM
NTSC4.43
SYNC ON G OFF
INPUT Menu
33