Circuit Programming; Zone Selections; Extended Programming; Home Set Zone Selection - C&K systems S802 Installation Manual

CIRCUIT PROGRAMMING

CIRCUIT
PROGRAMMING
Circuits 2 - 7 can be reprogrammed to suit your requirements. Circuit 1 is fixed as
a Final exit circuit. Circuit 8 has limited options.
ZONE
Select the circuit you wish to alter. That circuit may then be programmed by
SELECTIONS
entering one key from the following table. Once the option is selected press * to
confirm. The accept tone will sound.
EXTENDED
PROGRAMMING
To program zone 3 as an "Entry Route" enter - 4 3 7 *
To program zone 8 as a "Keyswitch" enter - 4 8 4 *
EXTENDED PROGRAMMING OPTIONS
Further options are available to increase the versatility of the control panel.
HOME SET
ZONE
SELECTION

HOME SET ZONE SELECTION

This Control Panel can enable parts of the premises to be alarm protected while
other parts are occupied and in use .. This can be achieved by using the Home
Set feature. This is similar to Night Set except that an Exit/Entry route is not
required as part of the Setting or Unsetting procedure.
In programming mode press 8 to select Home Set zone selection mode.
ENTER PROGRAM ZONE
4 - 2 2
4 - 3 3
4 - 4 4
4 - 5 5
Option no.
1
2
3
4
5
6
7
8
SEE GLOSSARY OF TERMS (p.11) FOR DESCRIPTIONS OF ZONE TYPES etc.
Enter 7 - 1 Disables sounder & strobe in night set.
Enter 7 - 2 Chime Enable ( See user manual for zone allocation).
Enter 7 - 3 Full set door sense setting.
Enter 7 - 4 Convert L+ to ID- output.
Enter 7 - 5 Allow Manual Isolation of Zone 1 (Entry/Exit) In night set.
Enter 7 - 6 Remote Keypad PA Enable ( Operated by * & # ).
Enter 7 - 7 L+ will latch only the first detector to alarm.
Enter 7 - 8 Inhibit strobe testing. ( For speech dialler connection)
Press * to confirm. The accept tone will sound
4 (Range 2-7)
N/S = Night Set
Zones 2-7
Alarm
Alarm with walk through
Alarm & Isolate in Night Set
Alarm, Walk through & Isolate in N/S
Alarm, Walk through & N/S Entry
Fire
Entry Route
P.A
7 (Range 1-8)
8 (Range 1-8 N/A if Fire or PA)
9
ENTER PROGRAM ZONE
4 - 6 6
4 - 7 7
4 - 8 8
Zone 8
Alarm
Fire
PA
Full set keyswitch