Mantel And Wall Projections; Heat & Glo • 6000Clx-Ipi-S, 6000Clx-Ipi-T, 8000Clx-S, 8000Clx-Ipi-T • 2166-900 Rev. Ag • 11/14 - Heat & Glo 6000CLX-IPI-T Owner's Manual

D. Mantel and Wall Projections
WARNING! Risk of Fire! Comply with all minimum clear-
ances as specifi ed. Framing or fi nishing material closer than
the minimums listed must be constructed entirely of non-
combustible materials (i.e., steel studs, concrete board, etc).
Mantels - Combustible or Painted Surfaces
3
2-1/2
5

Note: All measurements in inches.
Note: Measurement is taken from top of the
opening, NOT the top of the fi replace.
Figure 5.3 Minimum Vertical and Maximum Horizontal
Dimensions
22 Heat & Glo • 6000CLX-IPI-S, 6000CLX-IPI-T, 8000CLX-S, 8000CLX-IPI-T • 2166-900 Rev. AG • 11/14
TO CEILING
18
12
11
10
9
8
7
19
6
18
5
17
4
16
15
14
13
12
11
10
Measurement from fireplace
opening to bottom of appliance:
= 33-1/2 IN. (6000CLX)
= 35-1/2 IN. (8000CLX)
Mantel Legs or Wall Projections - Combustible or
Painted Surfaces
32
25
FIREPLACE OPENING
If
A
B
Figure 5.4 Clearances to Mantel Legs or Wall Projections
TOP VIEW
A
MANTEL LEG OR WALL PROJECTIONS
A B
minimum is ____, then maximum is_____.
2-7/16 3-7/16 4-7/16 5-7/16 6-7/16 7-7/16
Inches
62 87 113
Millimeters
1 2 3
Inches
25 51 76
Millimeters
(Acceptable on both sides of opening.)
INTERIOR WALL
B
138 164 189

4 5

102 127