Mantel And Wall Projections - Heat & Glo SL-5F-IFT Installation Manual

C. Mantel and Wall Projections
WARNING! Risk of Fire! Comply with all minimum clear-
ances as specified. Framing closer than the minimums list-
ed must be constructed entirely of non-combustible materi-
als (i.e., steel studs, concrete board, etc.).
Note: Measurement is taken from top/side of the
opening, NOT the top/side of the fireplace.
Combustible Mantels
Note: All
measurements
in inches.
11
10
9
8
7
6
5
4
3
6
5
4
TOP OF HOOD OR FIREPLACE OPENING
See Dimension V on Appliance
Dimension Diagram (Figure 3.1).
Figure 10.3 Clearances To Combustible Mantels Or Other
Combustibles Above Appliance
Non-Combustible Mantels
Note: All
measurements
in inches.
12
11
10
9
8
7
6
9
8
TOP OF HOOD OR
FIREPLACE OPENING
See Dimension V on Appliance
Dimension Diagram (Figure 3.1).
Figure 10.4 Minimum Vertical and Maximum Horizontal
Dimensions of Non-Combustibles
56
CEILING
16
15
14
13
12
17
16
15
14
13
12
11
10
9
8
7
CEILING
16
15
14
13
17
32
16
15
14
13
12
11
10
Heat & Glo • SL-5F-IFT, SL-7F-IFT Installation Manual • 2638-980 Rev. H • 6/22
Combustible Mantel Legs or Wall Projections
FIREPLACE OPENING
See Dimension B on Appliance
Dimension Diagram (Figure 3.1).
Figure 10.5 Combustible Mantel Leg or Wall Projection
(Acceptable on both sides of opening)
32
TOP VIEW
FIREPLACE OPENING
See Dimension B on Appliance
Dimension Diagram (Figure 3.1).
Figure 10.6 Combustible Mantel Leg or Wall Projections
(Acceptable on one side of opening)
Non-Combustible Mantel Legs or Wall Projections
FIREPLACE OPENING
See Dimension B on
Appliance Dimension
Diagram (Figure 3.1).
Figure 10.7 Non-Combustible Mantel Leg or Wall Projections
INTERIOR WALL
TOP VIEW
1/2 IN. MIN
2-7/8 IN.
MIN
MANTEL LEG OR WALL PROJECTIONS
INTERIOR WALL
3 IN.MIN.
5-7/8 IN.
MIN.
TOP VIEW
6 IN. MAX.
3 IN. MIN.
(Acceptable on both sides of opening)
3 FT. MAX.
UNLIMITED
UNLIMITED