Installation - Electrolux Wascator FOM71 CLS Installation Manual

Transportation and unpacking
The machine is delivered bolted onto the
transport pallet and packed in a crate or box.
• Remove packing from the machine.
• Remove front and rear foundation panels.
Remove the bolts between the machine and
pallet.
• Mount front and rear panel.
• Mount the feet and spacers in the load cells.
Fig.
Don´t move the machine until the feet have
1
been mounted.
Note the threaded holes for the feet.
• Push the machine back and mount the two
rear feet and then the two front feet.
The feet shall be mounted in the holes on the
load sensor bridge.
• Lift the machine and remove the transport
pallet.
• Place the machine on its final position.
Fig.
2
• Level the machine with the feet of the
machine.
The machine also comes with transport safety
Fig.
3
devices (four plate angles between the support
and the drum).

Installation

1
2
3
2:1
5710
5711
438 9160-21/03