Electrolux Wascator FOM71 CLS Installation Manual page 19

Drain connection
Connect a 75 mm (2 1/2") flexible rubber hose to
the machine's drain pipe, ensuring a downward
flow from the machine. Avoid sharp bends which
may prevent proper draining.
There shall be an air-gap of 50 mm between the
drain hose and the drain.
Be sure that the drain hose is flexible enough not
causing weight problems for the scale.
PVC-pipe or corresponding material may not be
connected to the machine due to the load cells.
The drainage hose should be located over a floor
Fig.
1
drain, drainage channel or the like so that the
distance between the outlet and the drain is at
least 25 mm (1").
Sample cock
Fig.
Mount the cock on the right hand side of the
2
machine. When mounting use thread tape.
Installation
1
2
6:1
5713
5709
438 9161-01/02