EPSON AcuLaser C1900/AcuLaser C900
1.5 RAM Expansion
<AcuLaser C1900>
Insufficient memory triggers to display the following errors:
"Mem Overflow", "Image Optimum", "Need Memory", "Duplex Mem Overflow"
In these cases, it may be possible to overcome the problem by one of the following
methods.
Set the resolution on 300 dpi in the case of B/W printing.
In the case of color printing, change the compression format
(Lossy compression)
Make the receiving buffer size smaller.
Set an I/F which is not used to OFF.
Additional memories must be installed to avoid memory
C H E C K
insufficiency properly. Additional memory expanding to a
P O I N T
maximum of 1 GB.
(SDRAM DIMM compatible with PC-100 or PC-133 of 32/64/128/
256/512 MB)
Product Description
<AcuLaser C900>
The following errors or warnings appear in this printer in case of insufficient memory.
"Print Underrun", "Mem Overflow", "Duplex Mem Overflow", "Image Optimum",
"Need Memory"
Changing the resolution to 300 dpi avoids these errors in some
C H E C K
P O I N T
cases, but to avoid memory insufficiency properly, additional
memories must be installed.
Additional memory expanding to a maximum of 144 MB.
SDRAM DIMM dedicated to Aculaser C1000/AcuLaser C7000
(The shape of slot is different from PC slots) 16 MB, 32 MB, 64
MB and 128 MB
RAM Expansion
Revision B
79