Epson AcuLaser C1900 Service Manual page 132

EPSON AcuLaser C1900/AcuLaser C900
Table 3-19. Messages (continued)
LED Message
Format Error ROM A
Form Feed
(Displayed during test printing)
Warming Up
Calibrating Printer
Cooling Down
Offline
Cancel Print Job
uuuu Toner Low
Worn Photoconductor
Waste T Box Nearfull
Worn Fuser
Worn Tranfer Unit
Sleep
Ready
(Printing)
(Communication with inactive I/F)
(Job being executed (printing possible))
Troubleshooting
Category Status code Refer to
Warning 2000
Status 1008
1010
Status 1006
Status 1014
Status 1016
Status 1001
Status (job
1003
cancelled by host)
Warning
(uuuu = CMYK,
2017 ~ 2031
only the relevant
item is displayed)
Warning 2010
Warning 2011
Warning 2562
Warning 2563
Status 1007
Status 1000
Status 1009
Status 1012
Status 1002
Status Display (AcuLaser C1900)
Note *1: Jam may occur at multiple locations. In this case, they are displayed at the same
time. Also, the jam location names are separated with a space.
*2: The appropriate value among those (except Auto) for Paper Source of the Setup
p.142
menu as described in
p.134
(p.49)" is displayed.
*3: The appropriate value among those for Paper Size of the Printing menu as described
in "1.4.2 List of Panel Settings (Only with AcuLaser C1900)
p.134
*4: The appropriate value among those for paper size of the Tray menu as described in
p.134
"1.4.2 List of Panel Settings (Only with AcuLaser C1900)
p.134
*5: See the description on controller-related errors in
p.134
Errors (Controller Related)
p.133 *6: See the description on engine-related errors in
Errors (Engine Related)
p.142
p.142
p.142
p.142
p.142
p.135
p.135
"1.4.2 List of Panel Settings (Only with AcuLaser C1900)
(p.49)" is displayed.
(p.49)" is displayed.
"Table 3-2. List of Service Call
(p.124)".
"Table 3-1. List of Service Call
(p.124)".
Revision B
132