Details Of Warning Status And Remedy - Epson AcuLaser C1900 Service Manual

EPSON AcuLaser C1900/AcuLaser C900
INVALID AUX I/F CARD (STATUS CODE: 4014)
Description
An I/F card which can not be used with this printer has been installed.
Treatment method
Turn off the power and remove the I/F card. Then turn on the power again.
INVALID ROM A (STATUS CODE: 4003)
Description
A ROM module which can not be used with this printer has been inserted in the
slot as indicated on the LCD. Or the ROM module can not be recognized correctly
because of faulty contact.
Treatment method
Turn off the power and reinstall or remove the ROM module. Then turn on the
power again.
WRITE ERROR ROM A (STATUS CODE: 4006)
Description
Writing in a write unable ROM module was tried. Or writing did not completed
successfully. Or the slot A does not have a ROM module inserted.
Treatment method
Turn off the power once and then turn it on again or execute "Reset All".
WRITE ERROR ROM P (STATUS CODE: 4006)
NOTE: Not opened to users
Description
Writing did not completed successfully. The printer failed in receiving data or the
checksum of the received data does not agree. There was not sufficient memory to
receive the data en bloc. The designated device value is not correct.
Treatment method
1. Turn off the power once and then turn it on again.
2. Execute "Reset All".
3. If neither of the treatment methods above works, the error occurs as a service call
error.
Troubleshooting

3.2.5 Details of Warning Status and Remedy

MENUS LOCKED (STATUS CODE: 1001)
Description
When "Panel Lock = On" has been set, say, by EJL, this warning appears if setting
change on the control panel is tried. The setting value is not changed.
Treatment method
Set "Panel Lock =Off" by EJL or WebAssist, and setting change on the control
panel will be allowed.
HARD DISK FULL (STATUS CODE: 2569)
Description
Since the storage area of the hard disk is full, it can not store multiple-copy
printing data, form data or reserve job data.
Treatment method
Delete unnecessary form data and reserve job data.
RESERVE JOB CANCELED (STATUS CODE: 2565)
Description
The printer failed in registration of a reserve job.
Treatment method
1. If the number of registered reserve jobs has reached the maximum value, delete
one job from the registration list. For confidential jobs, once you execute printing
of one of them, the executed job will be deleted from the registration list, thus
reducing the number of registered reserve jobs.
2. If the memory capacity for registration, add memory. Install an optional HDD.
PS3 HARD DISK FULL (STATUS CODE: 2561)
Description
During PS3 font download, the storage area of the hard disk became full and the
font was not stored in memory.
Treatment method
Delete fonts which were downloaded before to create a free area in the hard disk.
Status Display (AcuLaser C1900)
Revision B
140