Network Settings; Set The Profile Name - NEC MH240 Setup Manual

• NETWORK SETTINGS

This section explains the wireless and network data for the phone. The following items are covered
here.
•

Set the Profile Name

•
Set the ESSID (Manual)
•
Set the ESSID (AP Scan)
•
Set the Security (OPEN)
•
Set the Security (WEP)
•
Set the Security (WPA-PSK)
•
Set the Security (WPA2-PSK)
•
Set the Security (WPA: PEAP)
•
Set the Security (WPA: TLS)
•
Set the Security (WPA2: PEAP)
•
Set the Security (WPA2: TLS)
•
Set the DHCP (IP)
•
Set the IP Address (Required when Selecting Fixed IP)
•
Set the Net Mask (Required when Selecting Fixed IP)
•
Set the Gateway (Required when Selecting Fixed IP)
•
Set the DNS Primary (Required when Selecting Fixed IP)
•
Set the DNS Secondary (Required when Selecting Fixed IP)
•
Set the SIP Profile
•
Set the Hand-off List
•
Set the 1st Connect
Set the Profile Name:
Factory Default: 1.NEC-SETUP (2 to 9 are blank)
STEP1: Go to "Config" menu.
STEP2: Press
STEP3: Press
STEP4: Press
STEP5: Edit Profile Name you want and then press "OK" soft key.
STEP6: Press
(See "PLACE THE PHONE IN CONFIG
to view Profile Select menu.
key to select a profile you want to edit and then press "OK" soft key.
to go to Profile Name edit screen.
to save.
1.NEC-SETUP
2.<Profile2>
3.<Profile3>
4.<Profile4>
Delete
Office1
12
19
MODE")
Prof. Select
OK Back
Prof. Name
OK Clear