Orientalmotor FE100 Operating Manual page 8

2 Safety precautions
Operation
• Before turning on the power to the inverter, set the motor output selector switch to
an appropriate position according to the output of the motor to be used with the
inverter. Failure to do so may result in injury or damage to the equipment.
• Use the inverter together with one of the specified motors. Use of any other motor
may result in fire.
• Start the inverter after confirming that an emergency stop can be actuated
promptly in case of problem. Failure to do so may result in injury.
• If any abnormality is observed, immediately turn off the inverter power. Failure to
do so may result in fire, electric shock or injury.
• The motor speed can be easily changed on the inverter to a desired level from low
to high. Before starting the inverter, thoroughly check the allowable speed ranges
of the motor and equipment. Failure to do so may result in injury.
• Do not perform signal checks while the inverter is operating. Doing so may result
in damage to the equipment.
Maintenance and inspection
• Do not let your hands or body touch the inverter's radiating fins immediately after
the inverter is stopped. It may cause skin burn(s).
• Do not connect or disconnect the inverter cables or connectors while the inverter
is receiving power. Doing so may result in electric shock, injury or damage to the
equipment.
Other
• To dispose of the inverter, disassemble it into parts and components as much as
possible and dispose of individual parts/components as industrial waste.
– 8 –