4 Preparation
Rear view of the inverter
Protective Earth
Terminal
Refer to p.27.
Shorting bar
The inverter is shipped
with these terminals
shorted by a shorting bar.
Refer to p.27.
Protective Earth
Terminal
Refer to p.27.
– 18 –
TB1: Main circuit terminals
Connect the motor, DC reactor
and power supply to these terminals.
Refer to p.27.
TB2: Input signal terminals
Connect input signals to these
terminals.
Refer to p.28.
TB3: Output signal terminals
Connect output signals to these
terminals.
Refer to p.28.
SW1: DIP switches
Use these switches for
various settings.
Refer to p.28.