Check The Print Quality; Choose Your Language - Brother MFC-J5910DW Quick Setup Manual

e
Store the orange protective part in the holder
inside the machine as shown.
f
g
Unpack the ink cartridge.
4
1
3
2
IMPORTANT
DO NOT shake the ink cartridges. If ink stains
your skin or clothing, wash with soap or
detergent at once.
h
Take care to match the colour of the lever with
the cartridge colour.
Install each ink cartridge in the direction of the
arrow on the label.
i
Gently push the back of the ink cartridge
marked "PUSH" until it clicks. After all the ink
cartridges are installed close the ink cartridge
cover.
Note
The machine will prepare the ink tube system for
printing. This process will take approximately four
minutes. Do not turn off the machine.
5

Check the print quality

a
When the preparation process has finished, the
LCD shows Set Paper and Press Start.
Press Start.
b
Check the quality of the four colour blocks on
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press Yes to
finish the quality check and go to step 6.
If you can see missing short lines, press No and
follow the steps on the LCD.
6

Choose your language

a
Press Menu.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press s or t to display Local Language.
Press Local Language.
d
Press s or t to display your language and
press the desired language.
e
Press Stop/Exit.