Brother MFC-J5910DW Quick Setup Manual page 18

For Wireless Network Users
k
Enter the Network Key you wrote down on
page 16 and then enter the key again in
Confirm Network Key, then click Next.
Note
If your network is not configured for
Authentication and Encryption, the following
screen will appear. To continue configuration,
click OK and go to l.
l
Click Next. The settings will be sent to your
machine.
Note
• The settings will remain unchanged if you click
Cancel.
• If you want to manually enter the IP address
settings of your machine, click Change IP
Address and enter the necessary IP address
settings for your network.
• If the wireless setup failure screen appears,
click Retry.
m
Disconnect the USB cable between the
computer and the machine.
n
Click Next to continue to install MFL-Pro Suite.
Wireless setup is now complete. A four
level indicator at the upper left of your
machine's LCD will show the wireless
signal strength of your access
point/router.
To install MFL-Pro Suite, continue to
step 18-f on page 20.
Now go to
page 20
18