Set The Date And Time; External Tad; Enter Personal Information (Station Id); Fax Only - Brother MFC-J5910DW Quick Setup Manual

7
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Yes
Are you using the voice message
function of an external telephone
answering device?
No
Do you want the machine to
answer fax and telephone calls
automatically?
Yes
No
Yes
a
Press Menu.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press Receive Mode.
d
Press s or t to display Fax Only, Fax/Tel,
External TAD or Manual.
Press the desired receive mode.
e
Press Stop/Exit.
No

Fax Only

Your machine
automatically answers
every call as a fax.
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
Manual
You control the
telephone line and must
answer every call
yourself.

External TAD

Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
printed.
8

Set the date and time

a
Press Menu.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press Date&Time.
d
Enter the last two digits of the year on the
Touchscreen, and then press OK.
To move the cursor to the left, press
re-enter the number.
e
Repeat for month/day/time in 24-hour format.
f
Press Stop/Exit.
9
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a
Press Menu.
b
Press s or t to display Initial Setup.
Press Initial Setup.
c
Press s or t to display Station ID.
Press Station ID.
d
Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
e
Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
f
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
and
5