Protecting Titles - JVC LPT1081-001A Instructions Manual

Protecting titles

Original
VR
DVD-RW DVD-RW
To prevent the accidental editing or erasing of the
titles, you can protect them in the original menu.
1
In stop mode, press [SET UP].
"Easy Setting Menu" or "Advanced Setting Menu"
will appear.
2
Select "Disc" using [Cursor U / D],
then press [ENTER].
3
Select "Original" using
[Cursor U / D], then press [ENTER].
4
Select the desired title using
[Cursor U / D / L / P], then press
[ENTER].
5
Select "Protect" using
[Cursor U / D], then press [ENTER].
Original
15/04 19:00 P12 XP
6
Press [ENTER] again.
-
Original Protect
15/04 19:00 P12 XP
7
Press [SET UP].
Writing on the disc starts.
It may take a while to write the data on a disc.
To protect a whole disc (DVD-RW VR mode
only):
Select "Disc Protect" from the Disc menu, then
select "Yes." Refer to "Setting a disc to protect" on
page 31.
Hint
• The protected title is marked with a key icon in the
original list.
Title Delete
3
Protect
0:00:59
OFF ON
3
0:00:59
Releasing titles from
Original
protecting
VR
DVD-RW DVD-RW
You can cancel the title protection feature after it is
applied.
1
Follow steps 1 to 4 in
" Protecting titles."
Original
2
Press [ENTER].
-
Original Protect
15/04 19:00 P12 XP
3
Press [ENTER] again.
The key icon will disappear from the title in the
original list.
4
Press [SET UP].
Writing on the disc starts.
It may take a while to write the data on a disc.
ON OFF
3 3
0:00:59
49
EN