JVC LPT1081-001A Instructions Manual page 57

Jvc dvd video recorder instruction manual
Table of Contents

Advertisement

Note
When playing back a disc with copyright protection:
• Even if you select "96kHz," the sound is down
sampled to 48 kHz.
Dolby Digital conversion (Default: Stream)
Digital Out - Dolby Digital
PCM
Stream
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
PCM:
Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to "PCM".
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with
Dolby Digital, set to "Stream".
Hint
When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital
format, set "Dolby Digital" to "PCM" so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
Settings for MPEG (Default: PCM)
Digital Out -
MPEG
PCM
Stream
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
PCM:
Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to "PCM."
Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with
MPEG, set to "Stream."
Settings for DTS (Default: ON)
Digital Out - DTS
ON
OFF
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
ON: Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to "ON."
OFF: No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to "OFF."
Dynamic Range Control (Default: ON)
Set to "ON" to make the dynamic range narrower.
Playback
TV Aspect
16:9 Wide
Parental Lock
All
Disc Menu Language
English
Audio Language
Original
Subtitle Language
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
ON
Video Out
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
The Dynamic Range Control function is effective
only with analogue audio connection.
Fast Forward with Audio (Default: ON)
Set to "ON" to output the sound during DVD playback
at x1.5 fast forward.
Playback
TV Aspect
16:9 Wide
Parental Lock
All
Disc Menu Language
English
Original
Audio Language
Subtitle Language
OFF
Digital Out
Dynamic Range Control
ON
Fast Forward with Audio
ON
Video Out
Select a setting using
[Cursor U / D], then press [ENTER].
Your setting is activated.
5
Press [SET UP] to exit.
Dynamic Range Control
ON
OFF
Fast Forward with Audio
ON
ON
OFF
57
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-n70sek

Table of Contents