BDPS200 BDPS400 BDPS600...
(Original instructions) ENGLISH Intended use e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord Your Black & Decker floor based fine spray system is suitable for outdoor use reduces the risk of electric shock. intended for atomising solvent based and water based paints, f.
ENGLISH (Original instructions) c. Disconnect the plug from the power source and/or the Do not use caustic (alkali) self heating or corrosive (acid) battery pack from the power tool before making any liquids in this sprayer as these can corrode metal parts or adjustments, changing accessories, or storing power weaken hose and seals.
(Original instructions) ENGLISH Residual risks. Additional residual risks may arise when using the tool which Warning! Wear a respirator or mask. may not be included in the enclosed safety warnings. These & risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations Warning! Use only non-flammable liquids.
ENGLISH (Original instructions) Assembly Filling the canister (fig. E Check to make sure that the side fill canister (6) is com- Warning! Before assembly, make sure that the tool is pletely screwed onto the sprayer. switched off and unplugged. Lay the sprayer on its side with the canister side lid facing Attaching the side fill canister (fig.
(Original instructions) ENGLISH Two speed control switch (fig. H) (BDPS600 only) Liquid material preparation (fig. L & M) Note : Make sure the type of material you use can be cleaned Your sprayer has two different speed settings. To change speeds, press the speed control switch (9). An with either mineral spirits or paint thinner (for oil-based paints) LED indicates setting 1 or 2.
ENGLISH (Original instructions) Maintenance and cleaning Hints for optimum use Your Black & Decker corded appliance has been designed to Preparation tips operate over a long period of time with a minimum of main- Always stir and strain the material thoroughly before use. tenance.
(Original instructions) ENGLISH Flushing the sprayer (fig. Q & R) Reassembling the sprayer (fig. Y & Z) Disconnect the sprayer from the power supply. Slide the spring (26) onto the front of the piston (27). Unscrew the lid from the side of the canister and pour any Insert the piston and spring into the front housing.
Black & Decker products once they have reached the end of their working life. To take advantage of this service BDPS200, BDPS400, BDPS600 please return your product to any authorised repair agent who will collect them on our behalf.
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...