Burner Settings; Venting Connection - Viessmann Vitocrossal 300 CT3 Series Installation Instructions Manual

Assembly

Burner Settings

Venting Connection

IMPORTANT
Do not use any other vent material.
Do not use galvanized pipe, plastic pipe and/or B-vent/L-
vent chimney liners of any kind.
WARNING
The use of vent material other than AL29-4C stainless
steel, positive pressure vent pipe and fittings, can
cause property damage, severe personal injury and/or
loss of life.
Flexmaster Canada Limited
452 Attwell Drive
Etobicoke, ON M9W 5C3
Tel.: (416) 679-0045
Fax: (416) 679-0051
Selkirk Canada Corporation
375 Green Road
Stoney Creek, ON L8E 4A5
Tel.: (905) 662-6600
Fax: (905) 662-5352
(US) 1-800-992-8368
(Canada) 1-888-735-5475
Email: info@selkirkcorp.com
Web: www.selkirkchimney.com
28
Vitocrossal 300, CT3 Series Installation
CAUTION
Do not exceed the maximum gas input of a particular
boiler model. At the highest burner stage verify the
maximum input by clocking gas meter.
See instructions supplied by burner
manufacturer
Use an AL29-4C® special stainless steel venting system
(UL/ULC/CSA listed for category IV) for vertical venting
of the Vitocrossal 300 boiler. Contact one of the following
suppliers to order.
The following chimney manufacturers may be contacted
for assistance in designing the appropriate venting system
for this type of boiler.
ProTech Systems Inc.
26 Gansevoort Street
Albany, NY 12202
Tel.: (518) 463-7284
Toll free: 1-800-766-3473
Fax: (518) 463-5271
Security Chimneys International Ltd.
2125 Rue Monterey, Laval, Quebec H7L 3T6
Tel. 450-973-9999
(US) 1-800-361-4909
(Canada) 1-800-667-3387
Fax: 450-973-2222
Email: infoeng@securitychimneys.com
Web: www.securitychimneys.com