Download  Print this page

Samsung SMH1713 Series Service Manual Page 28

Hide thumbs

Advertisement

4. Troubleshooting
4-4-7 E-45
Remove any moisture
of the sensor.
Check the sensor
terminal and housing.
Replace
the sensor.
Cooling Error (E-45)
YES
Is the sensor wet?
YES
Is the sensor voltage over 3V?
Does the same symptom
NO
continue after replacing
the sensor?
S/W Error
After Power > On,
NO
does the symptom continue?
Replace the PCB.
Perform the operation again and check if it
is working properly.
: To remove moisture from the sensor,
open the door for 5 minutes.
NO
: Check if the GND and sensor terminal
is maintained over 3V continuously during
the initial cooking course using a multi-
meter.
NO
YES
YES
28
sensor
sensor
terminal

Advertisement

Table of Contents

   Also See for Samsung SMH1713 Series

   Related Manuals for Samsung SMH1713 Series

This manual is also suitable for:

Smh9151b

Comments to this Manuals

Symbols: 0
Latest comments: