3. Disassembly and Reassembly
3-2 Replacement of Magnetron
NOTE1: W hen removing the magnetron, make sure the antenna does not hit any adjacent parts, or it may be
NOTE2: W hen replacing the magnetron, be sure to remount the magnetron gasket in the correct position and make
sure the gasket is in good condition .
Be sure to ground any static electric charge in your body and never touch the noise filter when you remove
the Grill .
Magnetron generates microwave .
Remove the magnetron including the shield
case, permanent magnet, choke coils and
(all of which are contained in one assembly)
1. Disconnect all lead wires from the
2. Remove nuts (2) securing the magnetron
to the wave guide .
3. Take out the magnetron very carefully .
(Especially antenna .)