Download  Print this page

Samsung SMH1713 Series Service Manual Page 23

Hide thumbs

Advertisement

4. Troubleshooting
4-4-2 E-12, E-22, E-28, E-32, E2A, E-2C ,E-42, E-2C, E-42 or E-62
Sensor Short Error (E-12, E-22, E-28, E-32, E2A, E-2C, E-42, or E-62)
Remove the shorted part
of the temperature sensor.
Remove any foreign
Substance from the
shorted part.
S/W Error
NO
After Power > On, does
the symptom continue?
YES
Replace the PCB.
YES
Is the sensor shorted?
YES
Is the sensor terminal part
of the PCB shorted?
Does the voltage change
YES
as the humidity, temperature
and weight cha
The sensor is out of order.
Replace the sensor.
Perform the operation again and
check if it is working properly.
: Check if both terminals of the
sensor are slightly shorted.
NO
: Check if the sensor and related
parts such as the connector or
soldering parts are slightly shorted.
NO
: Check if the voltage of the GND and
sensor changes using a digital multi-meter
by forcefully changing the humidity,
NO
temperature and weight.
23
sensor
sensor
terminal
connector

Advertisement

Table of Contents

   Also See for Samsung SMH1713 Series

   Related Manuals for Samsung SMH1713 Series

This manual is also suitable for:

Smh9151b

Comments to this Manuals

Symbols: 0
Latest comments: