Download  Print this page

Samsung SMH1713 Series Service Manual Page 31

Hide thumbs

Advertisement

4. Troubleshooting
4-4-12 E-23, E-26
Check the heater
related drive part.
Replace the
heater.
Reconnect the
temperature
sensor properly.
Replace the
heater.
Preheating Error (E-08, E-23, E-26)
NO
Does the heater work?
YES
YES
Is the heater temperature
very low?
NO
NO
Is the temperature sensor
connected properly?
YES
Is the resistance
YES
between the heater terminals
more then a few MΩ?
NO
S/W Error
After Power > On,
NO
does the symptom continue?
YES
Replace the PCB.
Perform the operation again and check if it
is working properly.
31
: Check the voltages of
both heater terminals.
Heater
terminal
: After operating the heater for more then
10 minutes check if the heater temperature
remains low.
: A normal heater's resistance is a few Ω.
A short circuit increases the resistance
to a few MΩ.
Heater
terminal

Advertisement

Table of Contents

   Also See for Samsung SMH1713 Series

   Related Manuals for Samsung SMH1713 Series

This manual is also suitable for:

Smh9151b

Comments to this Manuals

Symbols: 0
Latest comments: