SanDisk CompactFlash Product Manual page 76

CIS Description
Data 7 6
Attribute
Offset
07Eh 0Ch R R
0 0
080h 0Fh R
0 0
082h 1Ah
084h 05h
086h 01h RFS
00
088h 07h
08Ah 00h
08Ch 02h
08Eh 0Fh R R
0 0
090h 1Bh
092h 0Bh
6-4
5 4 3 2 1 0
R R U S V
0 0 1 1 0
I E N P3 P2 P1 P0
0 0 1 1 1 1
CISTPL_CONF
RMS RAS
00 01
TPCC_LAST
TPCC_RADR (lsb)
TPCC_RADR (msb)
R R S P C I
0 0 1 1 1 1
CISTPL_CE
®
CompactFlash Memory Card Product Manual, Rev. 10.0 © 2002 SANDISK CORPORATION
Description of Contents
No Vpp, Silicon Drive with Unique
Manufacturer/Serial Number
combined string
V=0:No Vpp Required
V=1:Vpp on Modify Media
V=2:Vpp on any operation
V=3:Vpp continuous
S:Silicon, else Rotating
U:ID Drive Mfg/SN Unique
All power down modes and power
commands are not needed to
minimize power.
P0:Sleep Mode Supported
P1:Standby Mode Supported
P2:Idle Mode Supported
P3:Drive Auto Power Control
N:Some Config Excludes 3X7
E:Index Bit is Emulated
I:Twin -IOis16 Data Reg Only
Configuration Tuple
Link Length is 5 bytes
Size of Reserved Field is 0 bytes,
Size of Register Mask is 1 Byte,
Size of Config Base Address is 2
bytes
RFS:Bytes in Reserved Field
RMS:Bytes in Reg Mask-1
RAS:Bytes in Base Addr-1
Entry with Config Index of 07h is
final entry in table
Configuration Registers are
located at 200h in Reg Space.
First 4 Configuration Registers are
present
I:Configuration Index
C:Configuration and Status
P:Pin Replacement
S:Socket and Copy
R:Reserved for future use
Configuration Entry Tuple
Link to next tuple is 11 bytes. Also
limits size of this tuple to 13 bytes.
CIS Function
Basic ATA Option Parameters
Extended ATA Option Parameters
Tuple Code
Link to next tuple
Size of fields byte (TPCC_SZ)
Last entry of configuration table
Location of
Config Registers
TPCC_RMSK
Tuple Code
Link to next tuple