Install And Configure The Disk Array; Setting The System Option Modes - HP XP48 Configuration Manual

Install and configure the disk array

Setting the System Option Modes

Installation
The HP service representative performs these tasks:
• Assembling hardware and installing software
• Loading the microcode updates
• Installing the channel adapters (CHAs) and cabling
• Installing and formatting devices
After these tasks are finished, you will use Command View or LUN
Configuration Manager to complete the remaining tasks listed below. If you
do not have Command View or LUN Configuration Manager, your HP
service representative can perform these tasks for you.
The HP service representative sets the System Option Mode(s) based on the
operating system and software configuration of the host.
17