HP XP48 Configuration Manual page 37

Example
Example
Example
Example
Installation
4. When you are finished adding the new file systems to the mount table,
save the changes and exit the vi editor.
5. Verify that the new file systems are registered correctly; enter:
df
# df
File system
/dev/root
/dev/dsk/dks4d4s7
/dev/dsk/dks4d4l1s7
/dev/dsk/dks4d4l2s7
/dev/dsk/dks4d4l3s7
:
:
#
The default display for drive capacity is 512-byte blocks. To view the
capacity of the drives in kilobytes rather than in 512-byte blocks,
enter:
df –k
# df -k
File system Type
/dev/root xfs
/dev/dsk/dks8d0l13s0 xfs
#
To mount and verify the new file systems:
1. Mount all registered file systems; enter:
# mount –a
2. To verify the operation of each new file system, go to the mount
directory for the file system to be verified.
cd /HP5700_LU0
#
3. Copy any file to the mount directory.
cp /unix.backup1 /HP5700_LU0/unix.back1
#
4. Verify the file copy operation by listing the files in the current directory:
# ls –1
Type blocks use
xfs 1852624 1038184
efs 4659286
efs 4659286
efs 4659286
efs 4659286
Kbytes use
969857 414702
1048576 13
avail %use Mounted on
814440 57 /
2 4193354 0 /HP5700_LU0
2 4193354 0 /HP5700_LU1
2 4193354 0 /HP5700_LU2
2 4193354 0 /HP5700_LU3
avail %use Mounted on
555155 43% /
1048563 0% /HP5700-LU00
37