Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 5965 WPS Operating Instructions Manual

Spinning

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens /
Hygiene
Express 20
Freshen up
Automatic plus
Shirts
Denim
Dark garments
Drain / Spin
Steam care
Sportswear
Trainers
Outerwear
Proofing
Soft toys
First wash
Silks /
Pillows
Curtains
Separate rinse
Starch
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
28

Rinse and interim spin

There is a spin after the main wash and
rpm
between the rinses. A reduction in the
1600
final spin speed will also reduce the
1200
interim spin speed. For some
600
programmes with a spin speed of less
1200 than 700 rpm, an additional rinse is
introduced.
1600
1600

To omit the final spin (Rinse hold)

–
^ Press the Further extras 4 button to
1200
select Rinse hold.
600
– To end programme with a final spin:
900
1200 The washing machine will display the
maximum spin speed possible. You
1600
can select a spin speed lower than
–
this by pressing the X button. Start
1200
the final spin by pressing the
1000
Start/Stop button.
800
– To end the programme without final
1000
spin:
900
Press the Door button. The water will
1200
drain away. Press the Door button
600
again to open the door.
1200
To omit rinse and interim spin and
600
the final spin (No spin)
1600
^ Select the spin speed No ..
1600
The water will drain away and the
machine will go straight into the
Anti-crease stage. An additional rinse is
introduced for some programmes in
this setting.