Expander Engineer Keypad Functions - Texecom Premier 48-W Quick Start Manual

Premier 48-W Quick Start Guide

5. Expander Engineer Keypad Functions

The Engineers Keypad can be connected directly to the expander,
and has the following features & functions.

Learning & Deleting devices is not available from the
engineer's keypad.
Change Device attributes
Device attribute changes should be saved by either pressing the
/ key after each device change or by pressing the /
key after scrolling through the devices and making multiple
changes.
Once changed device attributes will be updated on the next
successful poll with the receiver, if however you wish to update the
devices immediately please see Update Devices on page 11.
 
 
 / 
    
 
 / 
  
 

  
 
 / 

  
    

  
 / 
10
Use 1 & 2 keys to change device attributes
1 = AUTO MODE (Default)
2 = ALWAYS AWAKE
 

 / 
Change Premier SmartKey™ attributes
Premier SmartKey™ attribute changes should be saved by either
pressing the  key after each Premier SmartKey™ change or by
pressing the  key after scrolling through the devices and making
multiple changes.
 
 
 / 
   
  
 / 
  
   

  
   
 / 
 / 
Once changed Premier SmartKey™ attributes will be updated the
next time the Premier SmartKey™ is powered on.
/ Key Functions
When in Commission Mode (see page 14) pressing the / key
will display further information about the device's routing information
and signal strength.
No Hops
In this example the device is "Home
Running"
1 Hop
In this example the device is hopping
through device 16 and the relevant
signal strengths are shown
2 Hops
In this example the device is hopping
through device 18 & 6 and the relevant
signal strength is shown.
Use 1 & 2 keys to change fob attributes
1 = LED On/Off (Default is On)
2 = Aux Off/On (Default is Off)
*SmartKey attributes will be updated the
next time the fob is powered up.
 
  
 
 
  
 
INS531