Table of Contents
Advertisement
ENR 400 Installation Manual
5.4.4
Setting - PTZ - Config
Camera list
Communication settings
PTZ parameter
Tour settings
Preset settings
Camera list
Available cameras in the system. Select one and activate checkbox for editing PTZ
functions.
Basic settings
Select the device type from the drop-down menu.
Com port
not supported in ENR, greyed
Baud rate
Address
Advanced setting
Speed setting for PTZ and Autopan (functionality depends on camera model)
Patrol group
Submenu for defining preset tours of this camera, 4 tours are available
For creating a tour insert available presets from left list, adjust dwell time and turn on the
checkbox "Active".
User defined
Submenu for defining presets for special functions (depending on PTZ camera)
preset
27 of 81
ENR400_ma_inst_en_rev01
Advertisement
Table of Contents
