Table of Contents
Advertisement
ENR 400 Installation Manual
5.6.4
Conigure - Encoding Option Panel
Always Record
Record on Event
Record on Motion
Pre-record/ Post-
record Time
56 of 81
Select this option to record the video at all time.
Select this option to obtain the Select Event panel. From the Smart Guard list,
check the box of the camera(s) that you want to trigger the recording action.
Click OK to complete the setting.
Note: This option needs start Smart Guard to trigger the recording schedule.
Select this option to start recording when there are motions detected.
To detect Motion, you have to define a detection zone. Left-click and drag the
mouse to draw a detection zone. You may define more than one zone on the
screen by repeating the same process.
User can also click on "All" button to select the entire detection zone. You may
adjust the sensitivity and the frame interval.
The pre-record/ post-record function saves the recording data accordingly. For
instance, to set up a 5 second pre-record time means the system will start
saving the recording data 5 seconds before the event happens.
Select Event Panel
Always Record
Record on Event
Record on Motion
Pre-record/ Post-record
ENR400_ma_inst_en_rev01
Advertisement
Table of Contents
