Table of Contents
Advertisement
ENR 400 Installation Manual
5.7
E-Map
The ENR series provides an e-map function, which allows to show location of installed IP - Devices on maps or
other graphics.
In GUARD mode the map can popup automatically in case of an event and show the event location including
preview of the event camera.
For setup of e-map go to > START > E-MAP.
Select "Edit mode".
Click on "ADD MAP"
Enter the map or image file. Accepted file formats are BMP, JPEG, TIFF, PNG, GIF.
Assign a map name and confirm with OK.
The map will appear in the middle window and the map name is listed in the device list on left side.
57 of 81
List of installed IP
devices
Map - area
Preview window for
selected camera
Additional info for
map.
ENR400_ma_inst_en_rev01
Advertisement
Table of Contents
