Table of Contents
Advertisement
TIMER RECORDING ON HDD/DVD DECK
44
EN
b
Timer Programming
You can programme this unit to timer-record as many as 16
programmes.
a
With the
system, timer programming is greatly simplified
because each TV programme has a corresponding code number
which your unit is able to recognise.
You can use the remote control to enter the
●
Make sure that the unit's built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
0 – 9
ENTER
DISPLAY
VPS/PDCj
1
Load a recordable disc if recording to DVD.
2
Press PROGRAMME to access the programme top screen.
3
Press FGD E to select ASHOWVIEWB, then press ENTER.
●
When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMESB appears on the TV screen, you need to
cancel some of the reserved programmes. (A pg. 47)
4
Press the number keys to
a
enter the
number of
a programme you wish to
record.
OR
Press FGD E to select the
desired number key on the
screen, then press ENTER.
Repeat to enter all required
numbers.
If you have made a mistake, press FGD E to select ADELETEB
●
or ADELETE ALLB, then press ENTER and input the correct
number before you press ENTER again.
5
Press F G to select ARECORD TOB, then press ENTER. Press
F G to select the desired recording deck, then press ENTER.
6
Press FGD E to select ACONFIRMB, then press ENTER.
●
If the number you entered is invalid, ASHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV
a
screen. Input a valid
●
If AGUIDE PROGRAMME IS NOT SET SET GUIDE
PROGRAMME THEN RETRYB appears on the TV screen, set
Guide Programme Numbers manually. (A pg. 74)
a
number.
CABLE/SAT
TV
DVD
PROGRAMME
FGDE
RETURN
1
1
3
3
PROGRAMME > SHOWVIEW (1/2)
2
2
2
SHOWVIEW NO.
1 2 3 4
1
2
3
SELECT WITH @
THEN PRESS [ENTER]
4
5
6
PRESS [PROGRAMME]
7
8
9
TO EXIT
0
DELETE
DELETE ALL
RECORD TO
DVD
PROGRAMME
ENTER
CONFIRM
EXIT
SELECT
number.
7
a
The
number you entered and the matching timer-
recording information are displayed on the TV screen. Check
the programme data.
●
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see Ab System SetupB (A pg. 74) and
set the Guide Programme number correctly.
8
Press F G to select the desired recording option as required.
Press F G to select the desired setting, then press ENTER.
●
AINPUT TITLEB (A pg. 50, AModify Title NameB)
●
ACATEGORYB (A pg. 51, AModify CategoryB)
●
AVPS/PDCB (A pg. 45, AVPS/PDC RecordingB)
●
AWEEKLY/DAILYB (A pg. 45, AWeekly/Daily RecordingB)
●
AREC MODEB (A pg. 32, ARecording ModeB)
9
Press F G to select AOKB, then press ENTER to access the
Programme Confirmation screen.
10
Press D E to select AEXITB, then press ENTER to complete
timer programming.
●
To programme another timer, press D E to select
ACONTINUEB, then press ENTER.
●
If APROGRAMME OVERLAPPEDB appears on the TV screen,
delete or modify the programmes.
NOTES:
●
There may be cases that the
function prolongs the stop time of the programming.
●
When two successive programmes are recorded on a DVD-RW
a
disc with the
Timer Programming function, the
beginning of the second one may be left off the recording.
●
If the copy limited programme is received during timer-recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong channel
number will be displayed on the
step 7. When this happens, set the correct Guide Programme
number for that station. (A pg. 74, Ab System SetupB)
Satellite Receiver Users
To timer-record a satellite broadcast using the
A Perform Ab Timer ProgrammingB (A pg. 44).
B Set the satellite receiver to the appropriate channel before
the selected programme begins.
C Leave the satellite receiver's power on.
a
Timer Programming
a
programme screen in
a
system:
Hide quick links:
Advertisement
Table of Contents
