JVC SR-DVM70EU Instructions Manual page 11

Rear View
A B
A Region Number Label A pg. 6
B AC Power Cord A pg. 16
C Cooling Fan
●
This prevents the temperature from rising inside the unit.
Do not remove it.
●
Install the unit so as not to block the area around the fan.
●
The unit may become hot when it is turned off, as the cooling
fan on the rear of the unit is not activated. However, the cooling
fan may be activated in the following cases;
^ In the Automatic Satellite Programme Recording standby
mode (A pg. 48), slightly before the starting time of VPS/PDC
recording (A pg. 45).
^ If you connect the decoder or satellite receiver to [L-2 IN/
DECODER], and if AL-2 SELECTB is set to ADECODERB, ASAT
VIDEOB or ASAT S-VIDEOB. (A pg. 63)
^ When AJUST CLOCKB is set to AONB (A pg. 77).
(Set AJUST CLOCKB to AOFFB if you mind the noise of the fan.)
C D
DIGITAL
AUDIO OUT
PCM/STREAM
COAXIAL
REMOTE IN
OPTICAL
HDD/DVD
J
E
F G
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
RIGHT LEFT
IN/OUT
L-2
L-1
K
D Digital Audio Output Connectors
[DIGITAL AUDIO OUT (OPTICAL/COAXIAL)] (HDD & DVD
deck only) A pg. 64, 70
E S-video Output Connector [S-VIDEO OUT] A pg. 16
F Audio Output Connectors [AUDIO OUT (LEFT/RIGHT)]
A pg. 16
G BNC Video Output Connector [VIDEO OUT] A pg. 16
H Component Video Output Connectors [COMPONENT
VIDEO OUT (Y/P /P
B
I Antenna Input Connector [ANTENNA IN] A pg. 16
J Remote Input Connector* [REMOTE IN]
* There is currently no compatible remote control unit available.
K L-1 Input/Output Connector [L-1 IN/OUT] A pg. 16, 62, 69,
70
L L-2 Input/Decoder Connector [L-2 IN/DECODER] A pg. 62,
69, 70
M Antenna Output Connector [ANTENNA OUT] A pg. 16
I
H
ANTENNA
COMPONENT
VIDEO OUT
Y
P
B
P
R
IN/DECODER
HDD/DVD
L M
)] (HDD & DVD deck only) A pg. 16
R
INDEX
11
EN
IN
OUT