VESPA GT 125 Workshop Manual page 87

Vespa GT 125-200
Electrical system
- Fit the battery as shown in the photograph.
N.B.
IN ORDER TO FIT THE CABLES ON THE BATTERY TER-
MINALS CORRECTLY, REST THE LOWER END OF THE
TERMINAL SIDE OF THE BATTERY ON THE EDGE OF THE
BATTERY WELL.
- Using the screwdriver, tighten up the battery ter-
minal cables as far as they will go, placing the
special Grover washer between the screw head
and the cable terminal.
N.B.
DO NOT USE WRENCHES TO TIGHTEN UP THE SCREWS
FOR FIXING THE TERMINALS TO THE BATTERY TERMI-
NALS
- Mount permanently the battery in the battery
chamber
- Refit the strap fastening the battery
ELE SYS - 87