Front Brake Calliper - VESPA GT 125 Workshop Manual

Braking system
- Keep the brake pads in contact with the pistons
and insert the calliper in the brake disc.
- Fix the calliper to the crankcase with the two
screws with elastic washer at the prescribed tor-
que as shown in the photograph
- Fix the brake pipe joint to the calliper and tighten
at the prescribed torque
- Bleed the system and refit the rear wheel
Locking torques (N*m)
Brake calliper support clamping
Brake pipe connection

Front brake calliper

BRAK SYS - 220
20 ÷ 25 Nm
20 to 25 N•m
Vespa GT 125-200