Dirt and dried up ink at the holder
of the ink cartridge can be removed
with a soft cleaning cloth moistened
in spirit (see figure 2)
Insert the new ink cartridge:
Take the ink cartridge from the
packaging and remove the coloured
protection film from the ink cartridge
(see figure 3)
Residual ink on the silver plate
can be removed with a soft cloth
(see figure 4)
Put in the new ink cartridge
into the ink cartridge holder
Push the locking clip upwards until
it engages, by this means the
ink cartridge will be locked
(see figure 5)
When jetStamp is in the
i
charging station, a cleaning
sequence for the ink cartridge
Note
can be activated by pressing
[ CLEAN ]
If necessary, press [ MODE ]
repeatedly until [ CLEAN ]
appears in the menu bar.
18
2
2
3
4
5