Advertisement
Clean glass regularly with a non-abrasive
cleaner. Turn thermostat down, open fire
door. Place a shield over door opening, apply
cleaner. Wipe off cleaner with paper towel.
Moisten a clean paper towel with water, wipe
glass and dry with paper towel.
1. Motor: Inspect and oil motor at least once a year, motor should rotate freely
2. Wheel: Inspect venter and exhaust wheel at least once a year to thoroughly
clean soot, ash, dust or any coating which may inhibit either rotation or air
flow
3. Vent System: Inspect all vent connections at least once a year for
looseness, evidence of corrosion and for flue gas leakage. Replace seal or
tighten pipe as necessary
It may be necessary to clean exhaust system and stove pipe during heating season.
Remove hanging baffle above 6 inch exhaust outlet inside stove. Brush pipe in
circular motion and vacuum stove pipe. To clean exhaust motor and radial fan
blade, remove 4 screws on mounting bracket of exhaust fan and clean fan housing.
During annual maintenance, the ½ tube on safety fume switch must be cleaned out
by vacuuming or by using a small brush. Vacuum or brush from inside of stove.
It is most important to perform the annual maintenance at the end of heating
season. Residue left on the fan blade and exhaust system may cause rapid
deterioration during non use.
Zero Clearance Stove
Maintenance
8
Advertisement
