Advertisement
Zero Clearance Stove
PUSHER BAR: Moves in a reciprocating motion. Activated by cam on gear
motor to force coal from hopper onto grate. Also pushes ashes off bottom grate
into ash pan. Length of stroke is adjustable by turning coal feed adjustment nut.
WHITE COAL FEED ADJUSTMENT: Turn clockwise for more coal feed,
Turn counterclockwise for less coal feed.
NYLON ADJUSTING SCREWS: To eliminate metal on metal contact. There
are 8 nylon screws on the pusher bar, 4 on each side. The 4 nylon screws pictured
on diagram are used to adjust the amount of sideward movement of pusher bar.
When nylon screws are properly aligned, the pusher bar will slide in and out freely
and have only a slight sideward movement.
NYLON CAM: located on gear motor. To give reciprocating motion to pusher
bar shown on next page
10
Advertisement
