Yanmar 4TNV98 Service Manual page 41

CAUTION
NEVER use high-pressure water or compressed
air at greater than 28 psi (193 kPa; 19 686
mmAq) or a wire brush to clean the radiator fins.
Radiator fins damage easily.
CAUTION
NEVER attempt to adjust the low or high idle
speed limit screw. This may impair the safety
and performance of the machine and shorten its
life. If the idle speed limit screws require
adjustment, see your
industrial engine dealer or distributor.
CAUTION
Establish a periodic
according to the engine application and make
sure you perform
maintenance at the intervals indicated. Failure
to follow these guidelines will impair the
engine's safety and performance characteristics,
shorten the engine's life and may affect the
warranty coverage on your engine.
See Yanmar Limited Warranty in Warranty
Section.
Consult your authorized Yanmar dealer or
distributor for assistance when checking items
marked with a.
4TNV98 & 4TNE98 Diesel Engine
authorized Yanmar
maintenance plan
the required periodic
If the fuel filter/water separator is positioned
higher than the fuel level in the fuel tank, water
may not drip out when the fuel filter/water
separator drain cock is opened. If this happens,
turn the air vent screw on the top of the fuel
filter/water
counterclockwise.
Be sure to tighten the air vent screw after the
water has drained out.
When the engine
conditions, clean the air cleaner element more
frequently.
NEVER operate the engine with the air cleaner
element(s) removed. This may allow foreign
material to enter the engine and damage it.
The maximum air intake restriction, in terms of
differential pressure measurement, must not
exceed 0.90 psi (6.23 kPa; 635 mmAq). Clean or
replace the air cleaner element if the air intake
restriction exceeds the above mentioned value.
Section 2. Periodic Maintenance
39
CAUTION
separator 2-3
CAUTION
is operated
CAUTION
turns
in dusty