Table of Contents
Advertisement
Initial settings
DOWN MIX
To playback a DVD VIDEO
disc recorded with
surround multichannel
audio correctly, the DOWN
MIX setting must be
properly made according to
your audio system.
Note that this setting affects
only the output signal from the ANALOG AUDIO output
jacks when playing back a DVD VIDEO disc recorded with
surround multichannel audio.
• Lt/Rt
Should be selected when you enjoy multichannel
surround audio by connecting the unit's ANALOG
AUDIO output to a surround decoder.
• L
/R
0
0
Should be selected when you enjoy conventional
2-channel stereo audio by connecting the unit's
AUDIO output to a stereo amplifier/receiver or
television set, or when you duplicate audio of a DVD
VIDEO disc recorded with surround audio to your MD,
cassette, etc.
• OFF
When you enjoy multichannel surround audio by
connecting the unit's 5.1-channel audio outputs to an
amplifier equipped with 5.1-channel inputs.
NOTES
• The "DOWN MIX" function does not work when the 3D
PHONIC function is activated.
• Some DVD AUDIO discs prohibit the 2-channel down-
mix. For such a disc, you cannot get the down-mixed
signal even if you set "DOWN MIX" to "Lt/Rt" or "Lo/
Ro" .
COMPRESSION
(only for Dolby Digital DVD VIDEO Discs)
When enjoying a DVD VIDEO
disc recorded with the Dolby
Digital format at low or
middle volume, setting
COMPRESSION to ON makes
you hear sound comfortably.
• ON
Audio is played back with the dynamic range
compressed.
• OFF
Audio is played back as it was recorded.
58
PREFERENCE1
PREFERENCE2
SPK. SETTING
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
OFF
COMPRESSION
OFF
DTS BASS MANAGEMENT
OFF
AUTO STANDBY
OFF
SCREEN SAVER
MODE1
DVD1
AV COMPULINK MODE
PRESS
KEY
PREFERENCE1
PREFERENCE2
SPK. SETTING
DIGITAL AUDIO OUTPUT
STREAM/PCM
OFF
DOWN MIX
COMPRESSION
OFF
OFF
DTS BASS MANAGEMENT
AUTO STANDBY
OFF
SCREEN SAVER
MODE1
AV COMPULINK MODE
DVD1
PRESS
KEY
NOTES
• The "COMPRESSION" function works only when
playing back a disc recorded with DOLBY DIGITAL. The
setting is not effective for other discs.
• The "COMPRESSION" function does not work when
the 3D PHONIC function is activated.
DTS BASS MANAGEMENT
This item controls the
output signals when playing
back DTS-encoded DVD
VIDEO discs.
• OFF
This is the normal setting for DTS-encoded discs.
Signals with the full frequency range are output from
all speakers when playing back a DTS-encoded disc.
This mode ignores all "Small" settings in the speaker
setting screen (All "Small" settings are regarded as
"Large").
• ON
All speaker settings (front, center and rear) in the
speaker setting screen are effective when playing back
DTS-encoded discs. The low frequency signal fed
from the sub-woofer output is boosted up regardless
of the "Bass redirect setting" in the speaker setting
screen.
See page 59 for the speaker setting screen.
AUTO STANDBY
When the unit is stopped for
more than 30 minutes or 60
minutes, the unit enters standby
mode automatically.
• 60
Time is set to 60 minutes.
• 30
Time is set to 30 minutes.
• OFF
The auto standby function is off.
PREFERENCE1
PREFERENCE2
SPK. SETTING
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
OFF
COMPRESSION
OFF
OFF
DTS BASS MANAGEMENT
AUTO STANDBY
OFF
SCREEN SAVER
MODE1
AV COMPULINK MODE
DVD1
PRESS
KEY
SPK. SETTING
PREFERENCE1
PREFERENCE2
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
OFF
COMPRESSION
OFF
DTS BASS MANAGEMENT
OFF
AUTO STANDBY
OFF
SCREEN SAVER
MODE1
AV COMPULINK MODE
DVD1
PRESS
KEY
Advertisement
Table of Contents
