Advertisement
• STREAM/PCM
Should be selected when you connect to the digital
input of an amplifier with a built-in DTS, Dolby Digital,
or MPEG multichannel decoder.
• DOLBY DIGITAL/PCM
Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
Output
Playback discs
STREAM/
PCM
DVD with 48/44.1
48/44.1 kHz,
kHz, 16 bit linear
16 bit, stereo
PCM
linear PCM
DVD with 48/44.1
48/44.1 kHz,
kHz, 20/24 bit
16 bit, stereo
linear PCM
linear PCM*
DVD with 96/88.2
48 kHz, 16 bit,
kHz, linear PCM
stereo linear
PCM*
DVD with 192/
48 kHz, 16 bit,
176.4 kHz, 16/22/
stereo linear
24 bit linear PCM
PCM*
DVD with DTS
DTS bitstream 48 kHz, 16 bit,
DVD with Dolby
Dolby Digital
Digital
bitstream
Video CD
44.1 kHz,
16 bit, stereo
linear PCM
Audio CD
44.1 kHz,
16 bit,
stereo linear
PCM
Audio CD with DTS DTS bitstream 44.1 kHz,
CD-R/RW with MP3 No output
* With some DVD VIDEO discs that are not fully copy-
protected, a 20 or 24 bit digital signal may be output.
DOLBY
DIGITAL/
PCM ONLY
PCM
+
+
+
+
+
+
+
+
+
stereo linear
PCM*
48 kHz, 16 bit,
+
stereo linear
PCM*
+
+
+
+
+
16 bit, stereo
linear PCM
+
+
NOTE
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers.
DOWN MIX
To playback a DVD VIDEO
disc recorded with
surround multichannel
audio correctly, the DOWN
MIX setting must be
properly made according to
your audio system.
Note that this setting affects
only the output signal from the ANALOG AUDIO output
jacks when playing back a DVD VIDEO disc recorded with
surround multichannel audio.
• Lt/Rt
Should be selected when you enjoy multichannel
surround audio by connecting the unit's ANALOG
AUDIO output to a surround decoder.
• L
/R
0
0
Should be selected when you enjoy conventional 2-
channel stereo audio by connecting the unit's AUDIO
output to a stereo amplifier/receiver or television set,
or when you duplicate audio of a DVD VIDEO disc
recorded with surround audio to your MD, cassette,
etc.
• OFF
When you enjoy multichannel surround audio by
connecting the unit's 5.1-channel audio outputs to an
amplifier equipped with 5.1-channel inputs.
NOTES
• The "DOWN MIX" function does not work when the 3D
PHONIC function is activated.
• Some DVD AUDIO discs prohibit the 2-channel down-
mix. For such a disc, you cannot get the down-mixed
signal even if you set "DOWN MIX" to "Lt/Rt" or "Lo/
Ro" .
Initial settings
English
PREFERENCE1
PREFERENCE2
SPK. SETTING
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
OFF
DTS BASS MANAGEMENT
AUTO STANDBY
OFF
SCREEN SAVER
MODE1
AV COMPULINK MODE
DVD1
SELECT
KEY
57
Advertisement
