Simulator Mode - Raymarine e7 User Reference

5. Press the OK button.
GPS selection
You can use an internal or external GPS receiver.
• The multifunction display features an internal GPS receiver.
• You can also connect an external GPS receiver using SeaTalk
or NMEA 0183.
• Use the System Settings menu to enable or disable the internal
GPS receiver.
Enabling or disabling the internal GPS
With the homescreen displayed:
1. Select Set-Up.
2. Select System Settings.
3. Select Internal GPS.
4. Select the On or Off option as appropriate.

Simulator mode

The Simulator mode enables you to practice operating your display
without data from a GPS antenna, radar scanner, AIS unit, or
fishfinder.
The simulator mode is switched on / off in the System Setup Menu.
Note: Raymarine recommends that you do NOT use the
simulator mode whilst navigating.
Note: The simulator will NOT display any real data, including any
safety messages (such as those received from AIS units).
Note: Any system settings made whilst in Simulator mode are
NOT transmitted to other equipment.
48
Enabling simulator mode
With the homescreen displayed:
1. Select Set-Up .
2. Select System Settings.
3. Select Simulator.
ng
e7 / e7D — User reference