Yamaha RS90K Service Manual page 399

1 Fuel pumps
2 Face the ends of each clamp
outward.
3 Fuel hoses
4 Coolant reservoir
5 Fasten the fuel tank breather
hose and speed sensor lead with
the holder. Secure the frame
cross member and the holder to
the frame with the nut and bolt.
6 Speed sensor lead holder
7 Rivet (qty: 4)
8 Align the punch mark on the
bearing holder with the rivet.
9 Bearing holder
0 Speed sensor
A Face the ends of the clamp
downward.
B Front axle
C Gear unit
D Primary sheave
E Water pump
F More than 5 mm (0.2 in)
G Water pump inlet hose
CABLE ROUTING
9-47
SPEC