Yamaha RS90K Service Manual page 250

2
1
OIL PAN AND OIL PUMP
5. Install:
• Oil pump driven gear 1
Oil pump driven gear bolt:
15 Nm (1.5 m · kg, 11 ft · lb)
NOTE:
• Install the oil pump gear with the stamped mark
"4XV" facing towards the oil pump assembly.
• While holding the oil pump driven gear with the
rotor holding tool 2, tighten the oil pump driven
gear bolt.
Rotor holding tool:
90890-01235, YU-01235
6. Install:
• Dowel pin
• Gasket New
• Oil pan
• Oil pan bolts
Oil pan bolt:
10 Nm (1.0 m · kg, 7.2 ft · lb)
NOTE:
Tighten the oil pan bolts in stages and in a criss-
cross pattern.
5-48
ENG