Yamaha RS90K Service Manual page 196

È
1
É
a
2
b
4
SLIDE RAIL SUSPENSION
a
1
3
c
d
4-74
2. Install:
• Front shock absorber 1 (RS90/RS90R/
RSG90)
• Rear shock absorber 2 (RSG90)
• 2-up adjusting block 3 (RST90)
NOTE:
• For RS90/RS90R:
Install the front shock absorber with the charging
valve a facing towards the rear of the machine.
• For RSG90:
Install the front shock absorber with the charging
valve a facing towards the front of the machine.
Install the rear shock absorber with the damping
force adjustment screw b facing downward.
• For RST90:
Install the lock lever guide plate 4 as shown in
the illustration so that the projection on the plate
contacts the projection c on the 2-up adjusting
block.
Make sure that the 2-up adjusting block is locked
in place and the end d of the lock lever is stick-
ing out from the sliding frame.
È RS90/RS90R
É RSG90
POWR
TR