On Screen Messages - BOXLIGHT Projecto Write8 User Manual

Two images, Side-by-Side(Half) format
Select
`
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 52.
Image does not display in 3D
Check if the battery of 3D glasses is drained.
`
Check if the 3D glasses is turned on.
`
Select
`
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 52.

On Screen Messages

Power off confirm
y
Power Off?
Press power key again.
Fan lock error
y
Warning! FAN LOCKED
The proejctor will switch off automatically.
No source found
y
No Source Found
Out of display range
y
Out of display range
Over temperature
y
Warning! TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.
English ... 48
"3D" --> "3D Format" from OSD and choose "Side-by-Side(Half)" for
"3D" --> "3D Format" from OSD and choose "Side-by-Side(Half)" for
VGA 1
VGA