Options - BOXLIGHT Projecto Write8 User Manual

Options

Options
Logo
Logo Capture
Auto Source
Input
Auto Power Off (min)
Lamp Settings
Dynamic Black
High Altitude
Filters Remind (Hour)
Information
Select
Logo
Use this function to set the desired startup screen. If changes are made they will
take effect the next time the projector is powered on.
Default: The default startup screen.
`
User: Use stored picture from "Logo Capture" function.
`
Logo Capture
Press ► button to capture an image of the picture currently displayed on screen.
Screen capture in progress...
For successful logo capture, please ensure that the onscreen image does not exceed the projector's
N N
ote ote
native resolution. (WXGA:1280x800).
"Logo Capture" is not available when 3D is enabled.
Before active this function, it is recommended that "Aspect Ratio" is set to the "Auto".
Auto Source
On: The projector will search for other signals if the current input signal is lost.
`
Off: The projector will only search current input connection.
`
Input
Press ► button to enable/disable input sources. The projector will not search for
inputs that are not selected.
English ... 32
Default
On
On
Off
Enter Exit
Please wait...